Frosty Sunrise melt and pour soap is a fresh spring swirl of soft teal green and bright lemon yellow, scented with a crisp, clean fragrance. The trick is pouring it very cool, around 104–107°F. I also tried adding white mica to the green to lighten it, so the yellow stands out more.
As an Amazon Associate I earn from qualifying purchases. Some links in this post are affiliate links. They cost you nothing extra and help support Koala Soap.
Materials & Tools
Soap Base
- About 20 oz of clear melt and pour soap base, split into two cups (I was a few ounces short, so measure your mold first)
Color & Scent
- Teal Green, Yellow Lemon and a white mica (Just Mica) from a Stardust mica set, also sold individually
- A crisp, clean fragrance oil (I used Alpine Frost)
Tools
- Square silicone soap mold (18–20 oz)
- Soap cutter
- Spray bottle of 91% isopropyl alcohol
- Thermometer
- Pour cups
Fragrance Amount
Use up to 5 ml of fragrance oil per 16 oz (1 lb) of soap base. You can always use less if you like a lighter scent, but don’t go over 5 ml per 16 oz.
How to Make Frosty Sunrise Soap
1. Melt the Base
Melt the clear base. Mine was about 140–145°F and already starting to skin. Clear base cools much faster than opaque bases.
2. Mix the Colors
Put alcohol in two cups, then add the micas. Leave the yellow on its own so it stays bright. Add green plus a little white mica to the other cup to lighten it. Add your fragrance.
3. Cool Way Down
Adding the alcohol and mica cools the soap quickly. Keep stirring and let both cups cool to about 104–107°F, within a couple of degrees of each other. They’ll be thick with some skin.
4. Pour Both Colors
Pour the yellow and green into the mold together, then move them around gently. The cool, thick soap holds the colors apart in soft swirls. Spray with alcohol.
5. Unmold and Cut
Once it’s set, unmold the loaf. Push it all the way to one side of the cutter. Keeping it in the middle lets it slide around. Press down and twist off each bar.
Tips & What I Learned
- Pour very cool. About 104–107°F gives crisp swirls in clear base.
- Keep colors within a few degrees. They pour and swirl more evenly.
- Lighten one color only. White mica in the green makes the plain yellow pop.
- Alcohol cools soap fast. Mixing your color with alcohol drops the temperature.
- Push the loaf to one side of the cutter. It keeps the loaf from shifting.
Troubleshooting
The colors blended into one. The soap was too warm. Let it cool more.
The soap is too thick to pour. Warm it in very short bursts and stir.
I came up short on soap. Measure your mold with water first. See my guide below.
FAQ
What does white mica do in clear soap?
It lightens and softens a color so another color stands out more.
Can I use opaque base?
Yes, but opaque bases cool more slowly, so the timing will be different.
More Swirl Soap Ideas
- Alpine Frost Swirl Melt and Pour Soap
- How Much Soap Does My Mold Hold?
- Summer Meadow Melt and Pour Soap
- How to Swirl Melt and Pour Soap
- All my melt and pour soap tutorials on YouTube
If you make this, I’d love to see it! Tag me on Instagram or Pinterest, and subscribe on YouTube for new soap tutorials.
