This Summer Roses Melt and Pour Soap is the perfect blend of beauty and practicality. Inspired by delicate pink blooms and soft greenery, this design captures the freshness of summer gardens. Whether you’re making it as a gift or adding it to your collection, this melt and pour soap technique helps you master layering, fragrance control, and color blending—all while producing a visually stunning bar that looks like blooming roses in soap form.
This tutorial is beginner-friendly yet refined enough for experienced soap makers looking to create professional, gift-ready bars.
Materials List
To recreate this melt and pour soap project, gather the following supplies. Always measure accurately using a digital scale for consistent results.
Soap Bases
- 4 oz. Clear Glycerin Melt and Pour Base
- 12 oz. Shea Butter Melt and Pour Base
Colorants
- Pink Strawberry or Watermelon Mica (for rose tones)
- Teal Green Mica by Stardust Micas (for leaf accents)
Fragrance
- 5 mL of “Energy” fragrance oil
(Use approximately 5 mL of fragrance per pound of soap.)
Tools & Equipment
- Square soap mold
- Silicone Mat
- Funnel cups
- Pipettes
- Digital scale
- Mixing bowls (heat-safe)
- Rubbing alcohol in a fine mist spray bottle (to remove bubbles)
- Microwave or double boiler for melting bases
- Thermometer
Step-by-Step Instructions
Step 1: Prepare and Measure Your Soap Bases
Start by weighing 4 oz. of clear glycerin and 12 oz. of shea butter melt and pour base. Cut the bases into small cubes to ensure even melting.
Step 2: Melt the Soap Bases
- Melt the clear glycerin base first using a microwave or double boiler in 15–20 second intervals, stirring in between until completely liquid.
- Melt the shea butter base separately following the same process.
- Keep the temperature below 160°F to prevent burning off the fragrance.
Step 3: Add Color and Fragrance
- To the clear glycerin, add your pink mica and half of your fragrance oil (about 2.5 mL). Stir thoroughly until the color and scent are evenly distributed.
- To the shea butter base, add the teal mica and the remaining 2.5 mL of fragrance oil. Mix until fully blended.
Step 4: Pour and Layer the Soap
- Spray the soap mold lightly with rubbing alcohol to eliminate air bubbles.
- Pour a small layer of the pink soap base, allowing it to partially set before adding the next color.
- Alternate between pink and teal layers for a petal-and-leaf effect.
- For the rose blossom texture, swirl gently with a pipette or skewer while the soap is semi-solid to create soft, blooming patterns.
Step 5: Cooling and Setting
Allow the soap to cool completely at room temperature. To check if it’s ready, touch the bottom of the silicone mold—it should feel cool to the touch, not warm.
Step 6: Unmold and Cut
Once fully set, gently remove the soap from the mold. Use a sharp soap cutter or non-serrated knife to slice even bars. Admire the layered rose design with soft green “leaves” throughout!
Pro Tips & Temperature Guidelines
- Fragrance Oil Ratio: Use 5 mL of fragrance per pound of soap base. For lighter scents or delicate essential oils, reduce to 3–4 mL.
- Ideal Pouring Temperature: Keep between 150°F and 160°F for smooth layering without melting the previous layer.
- Color Mixing Tip: Disperse micas in a small amount of melted soap base or rubbing alcohol before adding to prevent clumping.
- Cooling Check: Always verify the mold bottom feels cool before unmolding—this ensures clean, bubble-free cuts.
Troubleshooting
Problem: Fragrance evaporates or smells faint
Solution: Avoid adding fragrance above 160°F. Stir thoroughly before pouring.
Problem: Layers separate after cooling
Solution: Lightly spray each layer with rubbing alcohol before pouring the next one to improve adhesion.
Problem: Air bubbles on surface
Solution: Spray rubbing alcohol immediately after pouring each layer.
Problem: Soap looks cloudy or uneven
Solution: Overheating or stirring too aggressively can trap air—melt slowly and stir gently.
Variations
- Color Themes: Try lavender and mint for a spring floral soap, or red and gold for a festive holiday edition.
- Fragrance Blends: Experiment with citrus zest, rose garden, or cucumber melon for seasonal versions.
- Add-Ins: Incorporate fine cosmetic glitter or dried rose petals for a textured appearance.
- Shape Options: Use heart or flower molds to create themed soaps for gifting or décor.
Final Results
The finished Summer Roses Melt and Pour Soap features a delicate marbled design that looks like blooming roses with leafy accents. The blend of pink and teal gives a soft, fresh aesthetic, while the shea butter base provides a creamy lather and moisturizing finish.
Each bar is not only beautiful but functional—ideal for gifting to friends, nurses, or coworkers. Pair with a matching cup or a custom vinyl label for a coordinated handmade gift.
Conclusion
Creating the Summer Roses Melt and Pour Soap is a rewarding and creative way to celebrate color, fragrance, and craftsmanship. Whether you’re a beginner learning the basics or an experienced soap artist, this technique helps you produce professional-quality results that truly stand out.
Ready to explore more soap designs and tutorials? Visit KoalaSoap.com for step-by-step guides, recipes, and exclusive soap-making tips.
